TIMBER FRAME HOUSE, CABIN

Fachwerk House, Modern Cabin, Wood House, Chalet Haus

Wooden laminated structures. Fachwerk

Like this look you future constructor for you house. At this kind we deliver you order to the building place. After discharging and unpack beams & posts, our team make gathers your fachwerk house.

A material unique, his shrinkage almost zero. Process of execution consist :

Log is cutting for small one board lumber, next produce a drying, after finish drying the humidity should be not more 8-10 %. Next planning of a finished solder pads to ideal clean condition and put make-up on special glue, put it bat under special press. After this obtained body cutting for bars need to measures. The bar is normally consist from 4-5 solder pads, long is 10 meters and width 28 cm however it is not limit.

Like this house don’t needed more decorating. House from beam and post can make with out specials building techniques. You need only working drawings. By means of this material building not only privet house but and civil utility stadium, feather, clubs.

Laminated structural beams - a modern material for the construction of frame houses and more. Due to its high performance laminated board is able to withstand considerable loads. Allow the use of glued laminated wood in the construction of buildings for different purposes and categories. Glued laminated timber does not shrink.

The structure and construction - packages glued boards are composed of flat stacked and glued together two or more boards tolschennoy usually no more than 30 mm. For linear structural elements in a particularly thorough drying and the selection of timber, as well as the condition that these items will not be subject to particular climate change, the thickness of each of the boards glued up to 40 mm.

Packages laminated boards can be made almost any length and height. Length of laminated veneer lumber is limited to a useful length of the room where it is manufactured, a device for gluing, and the possibility of transportation. The height of the width of the planer. Currently, packages are made of 2.3 meters in height. This is accomplished by bonding together two packages, pre-connected dry during gluing. As a rule they can reach a length of 35 meters. Boards interconnected through gear connections, or on their heads.

Depending on the climatic conditions of structures made of laminated veneer lumber, use different adhesives. Urea - formaldehyde and rezontsirovanye. Glue is applied in a special bath. Boards are glued together and held under pressure during the time specified for the glue.

Press may be a screw or hydraulic, and provide uniform pressure. Glued boards packages by this method after the curing of the adhesive ostragivayut with two or four sides. And is treated according to customer requirements - drilling, keying slots for wedges, etc. Moisture content at the time of bonding have a special significance. It affects the strength of the laminated structure that is the possibility of later fractures. If you plan to transport, long-term storage prior to use in a heated room during which boards can be subjected to differential humidity conditions should take all measures from the effects of moisture on the laminated bags. Flexibility which allows the wood has a laminated board in the form of arches and frames.

The production process is laminated veneer lumber. Milestones:

Log sawing into small parts (slats)

Then, future elements fachwerk dried in special kilns, after completion of drying, moisture does not exceed 8-12%.

The next step to the frame - this calibration, cleaning, sanding.

Gluing on the length of blades under pressure, it is not quite ready to frame element, after gluing sawing the desired size. On average, the market reception consists of 4-5 lamellae (190-240 cm) in length can reach up to 12 meters (but it's not the limit).

Home-style fachwerk be no additional finishing. To assemble the frame you need is instructions for assembling the frame.

Laminated structures are used not only in low-rise housing construction, a frame made of laminated veneer lumber can be used in construction of buildings for different purposes: the stadiums, clubs, theaters, etc.

Prices for laminated veneer lumber depend on the quality of the source material used in the manufacture of laminated veneer lumber.

Price: $ 1000.00 1 cubic meter of finished products with a skeleton implementation of the project at home, instructions for assembling the frame, marking and packaging.